أهلا بك زائرنا الكريم في منتديات آرتين لتعليم اللغات (^_^)
اليوم هو الخميس آذار 28, 2024 3:48 م
اسم المستخدم : الدخول تلقائياً
كلمة المرور :  
لوحة الإعلانات الإدارية

عذراً أخوتي .. تم إيقاف تسجيل الأعضاء الجدد في آرتين حتى إشعار آخر


آخر المشاركات

  ... آرتين ...   » لابدّ أن أستأذن الوطن .... نزار قباني *  .:. آخر رد: محمدابو حمود  .:.  الردود: 4   ... آرتين ...   » لا يصلح العطار ما افسدة الدهر  .:. آخر رد: محمد الربيعي  .:.  الردود: 2   ... آرتين ...   » مناقشة كتاب"Translation with Reference to English & Arabic"  .:. آخر رد: Jordan  .:.  الردود: 124   ... آرتين ...   » المعرب و الدخيل و المولد ... تتمة  .:. آخر رد: aaahhhmad  .:.  الردود: 6   ... آرتين ...   » تحميل ملف  .:. آخر رد: مصطفى العلي  .:.  الردود: 0   ... آرتين ...   » The Best Short Stories of J.G. bialard The Terminal Beach  .:. آخر رد: المرعاش  .:.  الردود: 0   ... آرتين ...   » هام للطلاب الي بيواجهوا صعوبه بمادة الصوتيا  .:. آخر رد: bassam93  .:.  الردود: 16   ... آرتين ...   » مساعدة مشروع تخرج عن تراجيديات شكسبير  .:. آخر رد: ahmadaway  .:.  الردود: 0   ... آرتين ...   » نتائج سنوات 2009 2010 2011  .:. آخر رد: أبو عمر  .:.  الردود: 0   ... آرتين ...   » نتائج سنوات 2009 2010 2011  .:. آخر رد: أبو عمر  .:.  الردود: 0

جميع الأوقات تستخدم GMT + ساعتين [ DST ]


قوانين المنتدى


- يمكنكم في أي وقت زيارة قسم مكتبة اللغة الإنجليزية لنشر أو تحميل الكتب أو البرامج المتعلقة بهذا القسم .


إرسال موضوع جديد الرد على الموضوع  [ مشاركة واحده ] 
الكاتب رسالة
  • عنوان المشاركة: مطلوب ترجمة ضرورى للامتحان
مرسل: الأحد أيار 23, 2010 8:17 م 
آرتيني جديد
آرتيني جديد
اشترك في: 23 أيار 2010
المواضيع: 1
المشاركات: 1
القسم: هندسة
السنة: 3
لا يوجد لدي مواضيع بعد

:: ذكر ::


غير متصل
[align=center]--------------------------------------------------------------------------------

هاي
ترجمة النصوص من الانكليزي الى اللغة العربية بدقة من اجل الامتحان
ومشكورين جدا
1-
the cathode ray tube
the cathode ray tube ( crt ) is used in oscilloscopes , radar receivers and television sets . the type described here is that used in oscilloscopes . by means of a crt , an oscilloscope not only shows the size of signal . but also how the signal varies with time . in other words it shows the waveform of the signal .
the crt operates as follows . first electrons are emitted from a heated cathode . then these electrons are accelerated to give them velocity . next they are formed into a beam which can be deflected vertically and horizontally . finally they are made to strike a screen coated on its inner surface with a phosphor .
the crt comprises an electron gun and a deflection system enclosed in a glass tube with a phosphor coated screen . the electron gun form the electrons into a beam . it contains a cathode which is heated to produce a stream of electrons . on the some axis as the cathode is a cylinder known as the grid . by varying the negative potential on the grid . the intensity of the beam can be varied .
a system of three anodes follows . these accelerate the beam and also operate as a lens to focus the beam on the screen as a small dot . varying the potential on the central anode . a2 . allows the focus to be adjusted .
on leaving the electron gun , the beam passes through two sets of plates which are at right angles to each other . the first set of plates are the Y plates as these are nearer the anodes , they have a greater effect on the beam . therefore the signal is applied to this set . they control the vertical deflection of the beam . the second set are the X plates . on an oscilloscope the output from a timebase oscillator is applied across these plates as a means of moving the beam horizontally at regular intervals . hence the horizontal axis of an oscilloscope is the time axis . by means of the deflection system , then , the beam strikes the screen , the phosphor coated screen . when the electron beam strikes the screen , the phosphor coating fluoresces . various colours of light are produced on the phosphor used .
-------------------------------------------------------------------------------------------------
2-
circuit elements
current moves from a point of high potential energy to one of low potential . it can only do so if there is a path for in to follow . this path is called an electric circuit . all circuit contain four elements : a source , a load , a transmission system and a control .


the source provides the electromotive force . this establishes the difference in potential which makes current flow possible . the source can be any device which supplies electrical energy . for example , it may be a generator or a battery the load converts the electrical energy from the source into some other form of energy . for instance , a lamp change electrical energy into light and heat . the load can be any electrical device .
the transmission system conducts the current round the circuit . any conductor can be part of a transmission system . most systems consist of wires it is often possible , however , for the metal frame of a unit to be one section of its transmission system . for example , the metal chassis of many electrical devices are used to conduct current . similarly the body of a car is part of its electrical transmission system .
the control regulates the current flow in the circuit . it may control the current by limiting it , as does a rheostat , or by interrupting it , as does switch .
--------------------------------------------------------------------------------------------
3-
Conductors , insulators and semiconductors
If we connect a battery across a body, there is a movement of free electrons towards the positive end . this movement of electrons is an electric current . all materials can be classified into three groups according to how readily they permit an electric current to flow . these are: conductors and semiconductor .


In the first category are substances which provide an easy path for an electric current . all metals are conductors , however some metals do not conduct well . manganin , for example, is a poor conductor . copper is a good conductor , therefore it is widely used for cables . a non-metal which conductors well is carbon .salt water is an example of a liquid conductor .
A material which does not easily release electrons is called an insulator rubber , nylon , porcelain and air are insulators . there are no perfect insulators . all insulators will allow some flow of electrons , however this can usually be ignored because the flow they permit is so small.
Semiconductor are midway between conductor and insulators . under certain conditions they allow a current to flow easily but under others they behave as insulators . germanium and silicon are semiconductors . mixtures of certain metallic oxides also act as semiconductors . there are known as thermistors . the resistance of thermistors falls rapidly as their temperature rises . they are therefore used in temperature-sensing devices .


---------------------------------------------------------------------------------------------------
4-


The DC motor



An electric motor is a machine for converting electrical energy into mechanical energy . motors can be designed to run on direct (dc) or alternating current (ac) . the motor shown in figure 1 is a dc motor . its most important parts are the rotor , the stator and the brushgear .



The rotor is the moving part . it contains an armature , which is a set of wire loops wound on a steel core . when current is fed to the armature , these windings produce a magnetic field . the armature and core are mounted on a shaft which runs on bearings . it provides a means of transmitting power from the motor .



The rotor also contains a commutator . this consists of a number of copper segments .insulated from one another .



The armature windings are connected to these segments . carbon brushes are held in contact with the commutator by springs . these brushes allow current to pass to the armature windings . as the rotor turns , the commutator acts as a switch making the current in the armature alternate .



The stator does not move . it consists of magnetic and electrical conductors . the magnetic circuit is made up of the frame and poles . wound round the poles are the field coils . these form the stator is electrical circuit . when current is fed to them , a magnetic field is set up is the stator .



The motor operates on the principle that when a current-carrying conductor is placed in a magnetic field , a force is produced on the conductor . the interaction of the forces produced by the magnetic field of the rotor and the stator makes the rotor spin .



---------------------------------------------------------------------------------------------------



وشكرا
[/align]


أعلى .:. أسفل
 يشاهد الملف الشخصي  
 
إرسال موضوع جديد الرد على الموضوع  [ مشاركة واحده ] 

جميع الأوقات تستخدم GMT + ساعتين [ DST ]


لا تستطيع كتابة مواضيع جديدة في هذا المنتدى
لا تستطيع كتابة ردود في هذا المنتدى
لا تستطيع تعديل مشاركاتك في هذا المنتدى
لا تستطيع حذف مشاركاتك في هذا المنتدى
لا تستطيع إرفاق ملف في هذا المنتدى

البحث عن:
الانتقال الى:  

جميع الحقوق محفوظة لـ ©2012Art-En.com . تصميم بواسطة Art-En . راسلنا . سياسة الخصوصية . قوانين المنتدى
Powered by phpBB© . Translated by phpBBArabia